(B6 Series) Closed Loop Mode Hall Effect Current Sensor for Battery Supplied Applications

• Type: Hall Type
• Output Signal Type: Analog Output
• Production Process: SemiConductor Integrated
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: B6
• Material: Plastic
• Accuracy Grade: 0.5G
• Application: Switching Power Supply
• IP Rating: IP65
• Certification: ISO
• Customized: Customized
• Model: B6-50atb6-100A
• Power Supply: +-12,+-15
• Internal Resister: 400 Ohm
• Supply Voltage: +-12V, +-15V
• Power Consumption: Less Than 20+ Ipx(Np/Ns)
• Linearity: Less Than 0.1
• Galvanic Isolation: @ 50Hz,AC,1min 3kv
• Courier: DHL, TNT, FedEx...
• Bandwidth: @ -3dB 0~200kHz
• Transport Package: Green Plastic Film
• Specification: CE, ISO, Rohs
• Trademark: HEYI
• Origin: Liushi, Yueqing, Zhejiang Province, China
• HS Code: 8542390000
• Production Capacity: 5000PCS/Month

Product Description

B6 series current sensor is a closed loop device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed  currents.

Electrical data (Ta=25ºC±5ºC)

Type	B6-50A	B6-100A	Unit
Rated current(Ipn)	±50	±100	A
Measure range(Ip)	0-±75	0-±150	A
Turns ratio(Np/Ns)	1:1000	1:2000	T
Measure resister with±15V	@±50Amax 50(min)160(max)	@±100Amax 0(min)110(max)	Ω
	@±75Amax 50(min)90(max)	@±150Amax 0(min)33(max)	Ω
Coil resister	35	120	Ω
Rated output	±50±0.5%	±50±0.5%	mA
Supply voltage	±12,±15		V
Power Consumption	≤20+IpX(Np/Ns)		mA
Offset current	@Ip=0                     ±0.2		mA
Offset drift	@ -40~+85ºC              ≤±0.5		mA
Linearity	@Ip=0-±Ipn                ≤0.1		%FS
Response time	@50A/μS, 10%-90%        ≤1		μS
Galvanic isolation	@ 50HZ,AC,1min            3		KV
Bandwidth	@ -3dB                     0~200		KHZ

 

Applications

·Variable speed drives
·Welding machine
·Battery supplied applications
·Uninterruptible Power Supplies (UPS)
·Electrochemical
 

Mechanical dimension(for reference only)

Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
3. Elucidation:  1:+15V  2:-15V  3:I0UT

Directions for use

1. When measure current flows according to the direction of the arrowhead, Output terminal gets the same phase current.
2. The primary conductor should be≤120ºC.
3. The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.
4. The primary turns should be at the top of the sensor for the best magnetic coupling.
5. When the current will be measured goes through a sensor, the voltage will be measured at the output end.(Note: The false wiring may result in the damage of the sensor)
6. Custom design in the different rated input current and the output current are available.

Standards

·UL94-V0.
·EN60947-1:2004
·IEC60950-1:2001
·EN50178:1998
·SJ 20790-2000

General date

	Value	Unit
Operating temperature(TA)	-40 to +85	ºC
Storage temperature(TS)	-40 to +125	ºC
Mass(approx) (M)	20	g

 

Characteristics chart